The Common
Problems About the Huawei S2700,Huawei3700, Huawei S5700 Configuration
Question 1 : How to Delete the Files in the Recycle
Bin?
Answer 1 : Using the reset
recycle-bin [ filename ] command, you can delete the files in the recycle
bin. The files in the recycle bin cannot be restored after being deleted.
Answer 2 : The switch supports the remote upgrade of
the BootROM.
Log
in to the switch where the BootROM needs to be upgraded through Telnet, and
then run the upgrade basic-bootrom
system-filename command in the system view to upgrade the BootROM.
Question 3 : What Is the
Default BootROM Password of the Switch ?
Answer 3 : When
the system starts the BootROM, press Ctrl+B
within two seconds and then enter the default password to enter the BootROM
menu. In versions earlier than V200R001, the default
password is
huawei. In V200R001 and later versions, the default password is
Admin@huawei.com.
Question 4 :How to Delete the Configuration
Information from the Running Configuration File？
Answer 4 : You can run the reset saved-configuration command in the user view to delete user configuration
information from the running configuration file of the switch. After the device
restarts, the factory configuration is restored.
Usually, the reset saved-configuration command is
used in the following scenarios:
When a configured
Switch is applied to a new environment, the original configuration file may fail
to adapt to the new environment. In this case, you need to run the reset saved-configuration command to
delete the original configuration file and then reconfigure the Huawei Switch.
没有评论:
发表评论